热那亚大学相当于国内
歡迎來到上海微敏自控技術有限公司官網!
通用運動控制器MC800

通用運動控制器MC800 

立即咨詢
  • ● Suitable for various applications of drive technology, e.g.: Synchronization Control,Index and Print Mark Evaluation Control,Rotating   Cross Cutter Control, Flying Saw Control,Eccentric Shear Control, Label Printing Mchine Control, etc.
  • ● IO modules (optional), e. g.:CANopen,CC-link,DeviceNet,EtherCAT,Modbus TCP,PROFIBUS,Profinet,SERCOS-III,etc.
    ● Free assignment of the contro axis and index or print mark inputs
    ● New i ncluded control loop enables to run torque loop applications
    ● Tandem Drive Control


BY801 FIRMWARE FOR SYNCHRONIZATION OF DRIVES
With the use of BY701 firmware, the MC700 controller provides excellent solutions with all kinds of multi-axes synchronizing applications. Numerous possibilities for control of relative phase, position, index and print mark evaluation are available.
Compared to the BY701 firmware, a significantly higher dynamic is achieved by using the combination BY801 firmware with MC800. In addition, processing to various sensor systems and fieldbus architectures is possible.
FS801 FIRMWARE FOR FLYING SAWS, SHEARS, PUNCHERS, ETC.
By using this application firmware, the MC800 controller is equipped for motion control tasks with typical “on-the-fly-processing” machines (e. g. sawing, cutting, punching, drilling, etc.).
Compared to the FS701 firmware, a significantly higher dynamic is achieved by using the combination FS801 firmware with MC800. In addition, processing to various sensor systems and fieldbus architectures is possible.
CT801 FIRMWARE FOR ROTATING CROSS CUTTERS
Rotary cutters and other rotary applications require high dynamic, precise cuts and short position loop time. These requirements will be complied by using the CT801 firmware and the MC800 motion controller.
Typical applications are intermittent or rotary operations like cutting, perforating,printing, sealing, adhesion, labeling and many more.
Compared to the CT703 firmware, a significantly higher dynamics is achieved by using the combination CT801 firmware with MC800 hardware. In addition, an adaptation to a variety of sensor systems and fieldbus architectures is possible.
Special highlight of this firmware is the integrated tandem drive controller which enables achieving the acceleration requirement of a slave axis by distributing the power on two independent drives.
展開
热那亚大学相当于国内 广东福彩网上能投注吗 彩票达人是正规的吗 河北时时开奖视频 21点棋牌游戏 万人棋牌平台 麻将游戏下载 1分快3大小单双走势规律口诀 竟采比分网 买马坐庄稳赚吗 快速时时正规吗 时时彩官方网 内蒙古时时最新开奖 即时比分500 彩票店利润有多大 老时时彩走势图